<tr id="ltqn0"></tr>
  • <track id="ltqn0"></track><acronym id="ltqn0"></acronym>

    <pre id="ltqn0"><ruby id="ltqn0"><menu id="ltqn0"></menu></ruby></pre>
    1. <td id="ltqn0"></td>
    2. 歡迎訪問惠州市歐亞涂料有限公司官網!

      設為首頁 客戶反饋銷售服務

      歐亞服務熱線

      0752-2618999

      產品中心

      products center

      contact us

      歐亞服務熱線//0752-2618996

      地址: 惠州市仲愷高新區惠環
      街道西坑工業區
      電話: 0752-2618999
      0752-2618996
      傳真: 0752-2618995
      網站: www.wlwcy.net
      郵箱: ye168@eurasia.net.cn
      3C家電涂料
      您當前所在:網站首頁>產品中心>3C家電涂料

      產品參數 //

      產品名稱:EUK抗污涂料

      產品價格:面議

      產品規格:4L,20L

      產品數量:現貨

      所屬類別:3C家電涂料篇

      生產廠商:惠州市歐亞涂料有限公司

      產品詳情 //



      產品性能測試:

      Product performance test:

      測試項目
      TEST ITEM

      測試方法
      TEST CONDITION


      測試結果
      TEST RESULT


      附著性
      Crosshatch adhesion

      1mm2方格100個,透明膠帶測試
      A grid of 100 squares (1mm2), peeled with a pressure sensitive tape.

      100/100

      鉛筆硬度

      Pencil hardness


      三菱2H鉛筆500g

      MITSUBISHI 2H 500gf


      OK


      耐磨性

      Abrasion resistance


      RCA測試法175gf

      RCA 175gf


      300次無露底

      300 time No visible substrate beneath the coating


      震動耐磨

      Vibration and abrasion resistance


      2小時

      2hours


      OK


      記號筆測試

      Marking pen test


      真彩記號筆劃5個位置長35mm左右墨條,觀察油墨收縮狀況和樣板對比

      Draw line with length about 35mm by true color marking pen at five positions, observe printing ink contraction and compare it with the sample


      OK

      耐醇性

      Alcohol resistance


      995% alcohol, W=9.8N1kgfRubbing for 50 time.

      99.5%酒精W=9.8N1kgf)來回擦拭,露底前回數。



      ≥100回
      ≥100 time


      耐濕熱

      Humidity resistance


      40℃x 98%RH x 48H


      無異狀
      No change

      耐高低溫循環性

      Heat-and-Cold cycle


      (-20℃x8h ? 60℃x8h ) x 10 循環

      (-20℃x8h ? 60℃x8h ) x 10 cycle


      無異狀
      No change

      耐高溫

      High temperature test



      85℃x85RH x 48h




      無異狀
      No change

      耐低溫

      Low temperature test


      -25℃x96h


      無異狀
      No change

      接觸角測試

      Contact angle test


      a)接觸角測量儀;
      a) Contact angle meter
      b)容量為0.1ml的針管,滴水針頭內徑0.2mm;
      b) Needle tubing with volume of 0.1ml and the pinhead with inner diameter of 0.2mm;
      c)測試液體:蒸餾水、正十六烷;(測試水滴為針頭外徑的2~3倍)
      c) Test liquid: distilled water, n-hexadecane (test water drop is 2 to 3 times as large as outer diameter of pinhead)

      水滴角≧110度;
      油滴角≧65度
      Angle of water drop ≧ 110°;
      Angle of oil drop ≧ 65°


      測試條件:
      Preparation of test panels:
      1.噴涂底材:ABS塑膠板
      1. Substrate: ABS plastic plates
      2.前處理:用清潔劑擦拭面油污及塵粒
      2. Surface pretreatment: Removing grease and dust, with detergent.
      3.漆膜厚度:20~25um (空氣噴涂)
      3. Film thickness: 20~25μm(air spray coating).
      4.預干燥:60℃ X 5min+UV800~1000mg/cm2
      4. Pre-drying: 60℃ X 5min+UV800~1000mg/cm2
      注意事項:
      Notes:
      1、涂料應密封貯存于陰涼處,防水、防曬、防高溫、遠離火源。
      1. Sealed and stored in the dry and cool environment. Kept away from water , sunshine, high-temperature and fire.
      2、涂料在室溫下不開罐的貯存期為半年。
      2. Storage period of coating is half a year in room temperature under tank sealing condition.
      3、底漆在各自工藝條件下完全固化后方可使用該涂料。依據不同的底漆或基材附著不好的現象可能發生,使用前請確認。
      3. The primer must be cured thoroughly before application of UV coatings, otherwise the poor adhesion may occur.
      4、使用前請用400目的濾網過濾。
      4. Filtered with 400# silk gauze before use.
      5、涂料光固化前要有足夠的溫度和時間預烘干,否則會影響到漆膜性能。
      5. The UV coatings must have enough pre-drying before UV curing, otherwise the film properties may be influenced.

      版權所有©2016 惠州市歐亞涂料有限公司 粵ICP備16065135號-1
      地址:惠州市仲愷高新區惠環街道西坑工業區    技術支持:網聯科技
      電話:0752-2618999 2618996 傳真:0752-2618995

      性欧美丰满熟妇XXXX性久久久_女18一级大黄毛片免费女人_国产又黄又娇喘高潮视频_人与动人物av级毛片在线一